Shower Pan Liners

Serving All Areas of Southern California

Hot Mopping Shower Pans Is Our Specialty

Third Generation Hot Mop Shower Pan Company

How to Install Shower Pan Liners?

The first step to installing a shower pan or tray is making sure to lay down a solid, waterproof liner. A shower pan liner prevents water from leaking into the bathroom walls. Flexible shower pan liners are made from a rubber like material. They are strong, durable, long lasting, and easy to maneuver. Shower pan liners are placed over plywood sub floors and concrete slabs. If you are ready to install a shower, read through the following steps to learn how to install the shower pan liner.
 

Instructions

1- Lay the shower pan liner in the bottom of the shower floor. Cut a small hole with a utility knife in the center of the liner over the drain hole.

2 - Lay the drain base over the hole. Cover it with duct tape to prevent debris from getting into the drain before you are ready to assemble it.

3 - Lap the sides of the shower liner up the walls 10 inches on three of the shower wall sides. Use 8-penny nails to nail the liner to the wall studs 1/2 inch from the top edge of the liner. Make sure the nails go through the studs, not just the drywall.

4 - Start at the center of the shower floor, and extend the liner outward towards the walls, making sure that the bottom of the shower pan liner lays flat on the floor. Overlap the liner when you get to the corners, and secure the liner by hammering 8-penny nails through the liner and into the wall studs.

5 - Fold the liner over the shower curb. The curb is found on the open wall of the shower. It is usually only 6 inches high. Because there isn't a wall to nail the liner to, the liner is folded down over the curb. Drive 8-penny nails through the liner into the outside top edge of the curb.

6 - Make sure the liner is nailed either to the wall studs or to the curb. It should rest securely all the way around the perimeter of the shower. The goal is to make sure the shower is leak proof. You are now ready to install the shower pans

The Ultimate Pan Liner
“hot-mopping” with asphalt is one of the oldest waterproofing methods known to man. It has proved its dependability and durability in its use as a shower pan liner for well over 70 years!  We exclusively use this “time-tested” method to ensure your residential and commercial projects are protected 100% from day one! We install thousands of pans every year giving you the knowledge and peace of mind that you have the very best protection from water-intrusion for your hard surface showers floors!

Water Proof Any Shower Pan

Since a hot mop shower pan is applied in a liquid state, we can easily create a mold to fit your custom shower pan or tub. A hot mop shower pan protects any unique shape shower pan better than any other type of shower liner.

 

Guaranteed Quality

Our Hot mop shower pans are constructed out of layers of asphalt and hot tar, fiberglass reinforced corners, 15 lb. felt, with a sloped base that’s pitched at least 1/4 in. per foot. Every shower pan is built to code, thoroughly tested, fully insured and guaranteed

 

Quality Hot Mop Shower Pans

We are the reliable provider for “Top of the Line” Hot-Mopped Shower pan Liners",  where we will give you the
fastest service, best quality and the best pricing.  We serve all of Southern California, specially San Diego, Orange, Riverside, and Los Angeles counties.  Call for details 800-500-8640 to get a free estimate.
 

Free Estimates

FULLY BONDED & INSURED

Your Hot Mopping Specialist. Commercial & Residential Services.